Introduce of the raw materials and their funcation for PVC foam board
1.PVC resin

SG-7,K 60, or SG-5 mix with SG-8

2.PVC stabilizer

Lead based one pack PVC stabilizer or Ca/Zn stabilizer,

Funcation:Prevent the heat decomposition of PVC resin. Help the product to form

3.Chemical Foaming agent

AC blowing agent.NC blwing agent( white blowing agent), AC foaming agent belongs to the exothermic foaming agent, NC foaming agent belongs to the endothermic foaming  agent

4.Foaming regulator

Funcation: improve the melt strength of the melt and prevent the merger of the bubbles, so as to get the PVC foaming products with uniform foaming. At the same time, it can also promote the plasticization of PVC to ensure that the melt has good fluidity.

5.lubricants processing aid ACR175

Promoting plasticiation, stripping between materials and metals ,keep the material better fluidity

6.Lubtricant G60

It is internal lubricants promoting plasticization, improving polymer fluidity and improving the surface finish of products.

7 PE WAX

It is external lubricants,Reduce the friction between the polymer and the surface of the machine to prevent it from adhering to the mechanical surface

8.AC316A OR OA-6

It is high melt point ope wax, have good internal and external lubricants in middle and late processing

9.titanium dioxide ,optical brithener ,Ultramarine

As pigment ,let product more white, and look blue shade

10.Filler

Usually used coated calcium carbonate,Filler caco3 can inrease strengh of foaming board,can reduct cost of PVC foam board

Whatsapp&wechat:+86-13563682728

E-mail:mandyzhang@novistagroup.com

下一页:PLASTINDIA 2018

上一页:Brief introduction of Non-Toxic Ca Zn Stabilizer (Calcium Zinc PVC Stabilizer)

页面版权所有©山东诺威达新材料科技有限公司 | Copyright - 2017 All Rights Reserved.    鲁ICP备14019414号